The best cheap apple tv deals and sales for august 2020

How To Pair (or Re-Pair) an Apple Remote With an Apple TV

The Apple TV is easily one of the most versatile media-streaming boxes you can buy. You can stream your favorite content, mirror a FaceTime call, play a game, and without moving a phone, tablet, or PC to your TV. It’s like an iPhone interface for your TV, in fact – only you need the pesky bundle remote to function correctly.

Apple is ready to make its remot easy to use, but you may run into issues. This guide shows you how to reconnect Apple TV, add a new remote, and use the options for a bundled device.

A note about the remedy

The remote packed with the Apple TV 4K unit goes by two names: Siri and Apple TV supports the remote in areas that do not.

The remote, packed with the Apple TV 4K model, has a white ring around the menu button, indicating that it is the latest iteration of Apple’s remote design. This ring is only to help you find the menu button at a glance.

Meanwhile, the model packaged in the Apple TV HD bundle is from the previous generation. Its overall appearance and function are similar, but it does not have the same white ring.

Third and second generation Apple TV units were shipped with the same Silver Apple Remote (name change notice). First-gen Apple TV bundle shipped with heavy white remote Too Which is called Apple Remote.

Apple TV 4K

Apple tv 4k remote

The Apple TV remote (or Siri remote) is designed to pair automatically with your Apple TV 4K without any action on your part. It is as plug-and-play as you can get. However, nothing is right, not even Apple’s gadgets.

Check charge

Select apple tv settings remote

If you press on the remote, the Apple TV unit will not turn on Menu or House Button, ensure that the remote does not need to be recharged. The remote does not have an indicator of battery level, so you can remember low battery pop-ups on the screen.

Apple’s remote uses that pesky Lightning for USB-A cable – hopefully, you didn’t accidentally toss it when you upgraded to iPhone with USB-C (the culprit). Plug it in using a USB-A wall charger for at least 30 minutes, and try to use the remote to turn on the Apple TV unit again.

Remember, you can always check the battery level of the remote in the Apple TV settings:

Phase 1: Select and press down Touch surface to open Adjustment App.

stage 2: Choose Measures and tools.

Here you can display below a battery icon Distant, as shown above. However, you can get the actual percentage after completing step 3.

step 3: Choose Distant.

Remote pair again

If the problem is not just a dead remote, then add it again manually. Like this:

Phase 1: Check that your Apple TV has power.

You should see a small white LED lighted on the front. If it is not, unplug the power cable, wait six seconds, and then plug it back in. Now you should see a bright white LED.

stage 2: Make sure your TV is on, set to the correct HDMI port, and the Apple TV is displaying the home screen.

step 3: Stand at least 3 inches away from the Apple TV unit, point the remote to the TV and then press and hold Menu And volume up (+) Button for five seconds.

step 4: If prompted, place the remote on top of the Apple TV device.

You should see a message confirming that your Apple TV remote was successfully added. If you do not, and if Apple TV still does not respond to the button press, proceed to the next step.

Step 5: Unplug the Apple TV unit, wait six seconds, and then plug it back in (this is a hard reboot).

Step 6: Repeat steps 2 to 4.

If after trying all these steps, your Apple TV remote still won’t control your Apple TV, it could be defective. Unfortunately, this means Apple support and / or calling your nearest Apple store.

Apple TV HD (fourth generation)

Apple tv hd remote

The rear-gen remote for the Apple TV HD is almost identical to the one that ships with the Apple 4K TV unit. Again, the only obvious difference is that it does not have a white ring around the menu button. However, the instructions for pairing the remote are exactly the same.

Apple TV (third generation)

Apple-tv-2012-remote

The third-generation Apple TV packs an aluminum Apple remote with a non-rechargeable coin-cell battery.

replace battery

Try this before doing anything else. You will need a CR2032 or BR2032 lithium 3V battery depending on where the remote was originally installed.

Phase 1: Flip on the remote.

stage 2: Use a coin to turn the lid of the battery compartment until it opens.

step 3: Remove the old battery.

step 4: Place the new battery within the compartment, facing the printed side (positive).

Step 5: Replace the lid of the box.

If this does not work, proceed to the next section.

Remote pair again

Phase 1: Check that your Apple TV has power.

You should see a small white LED lighted on the front. If it is not, unplug the power cable, wait six seconds, and then plug it back in. Now you should see a bright white LED.

stage 2: Make sure your TV is on, set to the correct HDMI port, and the Apple TV is displaying the home screen.

step 3: Point the remote towards the Apple TV unit and then press and hold Menu And Left Button for six seconds. You should see an on-screen confirmation that the remote has been unlinked.

step 4: To link Apple Remote, press and hold Menu And right Button for six seconds.

You should see an on-screen confirmation that the remote is linked. If you do not, and if Apple TV still does not respond to the button press on the remote, proceed to the next step.

Step 5: Unplug the Apple TV, wait six seconds, and then plug it back in.

Step 6: Repeat steps 2 to 4.

Then, if none of these steps help, your Apple remote may be beyond help. A new one can be ordered online or purchased at the Apple Store.

Apple TV (second generation)

The second-gen Apple TV uses the Silver Apple Remote, similar to the third Silver Apple Remote. Follow the instructions given above.

Apple TV (first generation)

Apple tv 1st gen remote

The original Apple TV shipped with an elaborate, white plastic Apple Remote. As shown above, the play / pause button resides within the directional pad, while the menu button sits below both of them. The process of removing and adding this remote is similar to the second and third generation aluminum remote of Apple TV.

Use iPhone, iPad, or iPod Touch

If you have lost the remote or it is older than dead, you can always default the Apple TV remote control in the Control Center. The company added this functionality to iOS 11, but did not discontinue the TV Remote app until October 2020. To use these controls, do the following:

Phase 1: swipe down Top to right where LTE, Wi-Fi and battery icons reside.

stage 2: Tap on Distant Icon displayed in Control Center.

step 3: When the Apple TV remote control opens on the screen, make sure that your Apple TV device is listed at the top. If you have more than one, tap on the currently listed model and select the target device on the drop-down menu. All devices must be connected to the same local network.

step 4: If it is used for the first time, follow the instructions to enter the four-digit passcode provided to pair an Apple TV device with your iPhone, iPad, or iPod touch.

Add Apple TV Remote to Control Center

If you do not see these controls on your device, do the following:

Phase 1: Tap to open Adjustment App.

stage 2: Tap Control center.

step 3: Tap Customize control (If shown).

step 4: Green tap Plus Button next to Apple TV Remote Is listed under More control.

Configure a universal remote

Apple tv settings remote learn

Not interested in buying a replacement Apple remote? You can control your Apple TV with almost any existing infrared remote control. The only catch is that you will need a working Apple remote, an iPhone, an iPad, or an iPod touch to go to the Apple TV settings.

Here’s how to add a third-party remote:

Phase 1: Select and press down Touch surface To open the Settings app.

stage 2: Choose Measures and tools.

step 3: Choose Learn remote.

step 4: Choose Start Following and following the instructions.

Cohesion-665

If you are one of the universal remotes of Logitech’s Harmony line, you can download the remote code for Apple TV without the need to use the Learn Remote function.

Editors recommendations






Similar Posts